Granted Exemptions

Following brands/products has been granted an exemption from the requirements set out in the Material Regulations.

Products granted an exemption may be sold for the time the product has a valid exemption.
Products purchased during the exemption period may be used for play official matches throughout their expected lifetime; but …
If the product proves to be unsuitable for its purpose or, can cause injury or inconvenience; then the product’s lifetime exemption will be withdrawn and marked in the list below.
Products with expected long life, such as goals and rinks are to be specially marked, so that they can be distinguished from material fulfilling all the requirements.

Granted exemptions
Valid
Active
Manufacturer: E-Sports Group Oy.
Subject: Incorrect marked Exel sticks.
Cause: Not following Material Regulation specification of stick marking.
Brand and stick models:
Exel Gravity2 2.6 round, incorrectly marked 56 07 53
Exel Gravity2 2.9 roundd, incorrectly marked 57 07 54
Exel P100 2.3 oval, incorrectly marked 56 08 52
Exel P100 2.6 oval, incorrectly marked 56 08 53
Exel P100 2.6 round, incorrectly marked 56 07 53
Until December 31 2019Yes
Manufacturer: E-Sports Group Oy.
Subject: Non marked Exel sticks.
Cause: Not following Material Regulation specification of stick marking.
Brand and stick models:
Exel Vector White 2.6
Exel Vector White 2.9
Exel Vector White 3.4
Until June 30 2019Yes
Manufacturer: Shanghai GameWe Sports Development Co. Ltd.
Subject: Wrongly marked Rockwind sticks.
Cause: Not following Material Regulation specification of stick marking.
Brand and stick models:
Rockwind Superstring+1
Rockwind Superstring+2
Until June 30 2019Yes
Manufacturer: Power Stick Oy.
Subject: The missing of "Embossed IFF-mark"
Cause: Not following Material Regulation specification of requirement, point 1.3.2.4
Brands and blade model: Fatpipe Bone
Until June 30 2017No
Manufacturer: Renew Group Sweden AB
Subject: Manufacturing of older blades in moulding tools not having the embossed IFF-marking and produced before January 1 2008.
Cause: Not following Material Regulation specification of requirement, point 1.3.2.4
Brands and blade models: Unihoc Player and Ace.
Brands and blade models: Zone Rock.
Until June 30 2017No
Manufacturer: Renew Group Sweden AB
Subject: Manufacturing of older blades in moulding tools not having the embossed IFF-marking and produced before January 1 2008.
Cause: Not following Material Regulation specification of requirement, point 1.3.2.4
Brands and blade models: Unihoc Player, Evo2, Evo3, Ace, Irule, RAD, Badge and Nino.
Brands and blade models: Zone Zip, Rock, 360, 369, Envy, Greed, Pipeline, Pride and Piraya


Until June 30 2016No
Manufacturer: Power Stick Oy.
Subject: Not fulfilling the Blade radius.
Cause: The blade radius is slightly too large for a limetid distance of the radius.
Brands and blade models: Fatpipe, Rage
Until June 30 2016No
Manufacturer: L-Tec Sport Ltd.
Subject: The missing of "Embossed IFF-mark and brand name for blades" on old blade moulding tools manufactured before January 1 2008.
Cause: Not following Material Regulation specification of requirement, point 1.3.2.4
Brands and blade models: Karhu SBB02, SBB03, SBB07, SBB08, SBB09 and SBB10
Until June 30 2015No
Manufacturer: Renew Group Sweden AB
Subject: Manufacturing of older blades in moulding tools not having the embossed IFF-marking and produced before January 1 2008.
Cause: Not following Material Regulation specification of requirement, point 1.3.2.4
Brands and blade models: Unihoc Player, Evo3, Ace and Nino
Brands and blade models: Zone Zip, Pride and Piraya
Until June 30 2015No
Manufacturer: Renew Group Sweden AB
Subject: Use of the blade Zone 369 and Pipeline to the stick Unihoc Reactor Star.
Cause: Not following Material Regulation specification of requirement, point 1.3.2.4.
Brands: Unihoc
Until December 31 2015No
Manufacturer: Renew Group Sweden AB
Subject: Use of the blade Reactor Striker 35 to the stick Zone Air Base 31.
Cause: Not following Material Regulation specification of requirement, point 1.3.2.4.
Brands: Unihoc
Until December 31 2015No
Manufacturer: Habo Plast AB.
Subject: The missing of "Embossed IFF-mark for blades" on old blade moulding tools manufactured before January 1 2008.
Cause: Not following Material Regulation specification of requirement, point 1.3.2.4
Brands and blade models: Jolly Light, Ultimate, Twin, Star, Dominator, Argus, High Light, Monster, GPS, HL2 and Dollar.
Until December 31 2015No
Manufacturer: SB Yhtiöt Oy.
Subject: The missing of "Brand name for blades" on old blade moulding tools manufactured before January 1 2008.
Cause: Not following Material Regulation specification of requirement, point 1.3.2.4
Brands and blade models: Realstick Galant
Until December 31 2013No
Manufacturer: SB Yhtiöt Oy.
Subject: The missing of "Missing address on stick".
Cause: Not following Material Regulation specification of requirement, point 1.3.2.5
Brands and stick models: Realstick Level
Until December 31 2013No
Manufacturer: SB Yhtiöt Oy.
Subject: The missing of "Uniformed stick measurement marking".
Cause: Not following Material Regulation specification of requirement, point 1.3.2.1
Brands and stick models: Realstick all models
Until June 30 2014No
Manufacturer: SB Yhtiöt Oy.
Subject: 30 000 pcs "Ball with too low weight".
Cause: Not following Material Regulation specification of requirement, point 2.2.1
Brands and stick models: Realstick
Until December 31 2013No
Manufacturer: Power Stick Oy.
Subject: IFF-sticker design to small on the self-printed sticker.
Cause: Not to fulfil IFF-sticker design requirement on the self-printed sticker, point 1.3.2
Brands and stick models: Fatpipe, all models
Floorball season 14/15No
Manufacturer: Power Stick Oy.
Subject: Shafts a little bit too stiff in one direction.
Cause: Not to fulfil the Shaft Rigidity Metod A requirement, point 2.1.4.1
Brands and stick models: Fatpipe Beat 27 and Beat 31
Until June 30 2014No
Manufacturer: L-Tec Sport Ltd.
Subject: The missing of "Embossed IFF-mark and brand name for blades" on old blade moulding tools manufactured before January 1 2008.
Cause: Not following Material Regulation specification of requirement, point 1.3.2.4
Brands and blade models: Karhu SBB02, SBB03, SBB07, SBB08, SBB09 and SBB10
Until June 30 2014No
Manufacturer: Renew Group Sweden AB
Subject: Manufacturing of older blades in moulding tools not having the embossed IFF-marking and produced before January 1 2008.
Cause: Not following Material Regulation specification of requirement, point 1.3.2.4
Brands and blade models: Unihoc Player, Evo3, Ace and Nino
Brands and blade models: Zone Zip, Pride and Piraya
Until June 30 2014No
Manufacturer: Sportagon AG
Subject: <100 pcs incorrect marked sticks.
Cause: Not following Material Regulation specification of requirement, point 1.3.2.1.
Note: Icon dualflex 27mm marked: 46 74 09 instead of 46 74 08, dualflex 29mm marked: 46 74 10 instead of 46 74 09.
Brands: Icon.
Until December 31 2014No
Manufacturer: E-Sports Group Oy
Subject: The missing of "Uniformed stick measurement marking"
Cause: Not following Mateial Regulation specification of requirement, point 1.3.2.6
Brands: Exel and Canadien
Floorball season 12/13 and 13/14No
Manufacturer: 20TEN Sports s.r.o.
Subject: 20TEN Sports s.r.o. has got an exemption for the sales of compsite sticks / blades.
Valid for following models:
- Blade Oxdog OPB
- Stick Oxdog Onepice 26 Oval
- Stick Oxdog Onepice 26 Round
- Stick Oxdog Onepice 32 Round
Cause: Due to a revision of the interpetation of the Material Regulations and building of a new test method for composite blades.
Brand: Oxdog
Until May 31 2013

Withdrawn
No
Manufacturer: Renew Group Sweden AB
Subject: 200 pcs goals with some deviation from the requirements.
Cause: Not following Material Regulation specification of requirement, point 2.3.2 and 2.3.4
Note: All goals under this exemption are to be marked; so the goals can be disinguished from goals fulfilling all requirements.
Brand: Unihoc
Until December 31 2014No
Manufacturer: Renew Group Sweden AB
Subject: Goal corner radius.
Cause: Not following Material Regulation specification of requirement, point 2.3.2
Brand: Unihoc
Until September 30 2009No
Manufacturer: Renew Group Sweden AB
Subject: The missing of "Embossed IFF-mark for blades" on old blade moulding tools manufactured before January 1 2008.
Cause: Not following Material Regulation specification of requirement, point 1.3.2.4
Brands: Unihoc, Zone, Pro Touch and Radical
Until June 30 2012No
Manufacturer: Renew Group Sweden AB
Subject: The missing of "Name of certificate holder"
Cause: Not following Material Regulation specification of requirement, point 1.3.2.5
Brands: Unihoc, Zone, Pro Touch and Radical
Floorball season 08/09No
Manufacturer: Libro Gruppen AB
Subject: 4000 pcs incorrect marked sticks
Cause: Not following Material Regulation specification of requirement, point 1.3.2
Brand: X3M
Floorball season 07/08No
Manufacturer: International Gateway AB
Subject: Self-printed IFF-mark
Cause: Not following Material Regulation specification of requirement, point 1.3.2
Brand: Canadien
Floorball season 06/07 and 07/08No
Manufacturer: Exel Oy
Subject: Self-printed IFF-mark
Cause: Not following Material Regulation specification of requirement, point 1.3.2
Brand: Exel
Floorball season 06/07 and 07/08No